ZongshenForum.com
Models => Sportbikes => Topic started by: Jezza on November 04, 2015, 02:20:19 AM
-
After recently purchasing a gs 250 I thought it may be relevant , to point out a starting tip. The stand and clutch have safety switches and unless the stand is up and clutch held in. THEY DONT START. seen a lot of folks not being able to get them started , that's my findings
-
Yep. Side stand up, safety cut out switch also may be switch in clutch so hold clutch in. Pull out enricher ((marked as choke)) lever 1/2 way, first notch, DONT touch accelerator with this carb as you operate electric start as it is a CV type and you will increase difficulty of starting, then operate starter and starts first pop every time. After start up warm engine with fast 2000-2500rpm for a minute or so then GO.
-
What causes you to face those problems?
-
id. That even got reverse
-
This post gives me the information I am looking for and is good information.