Dear all

After getting my bike running i was on the motorway where i heard squealing noise coming from the engine.

I pulled over to check nd it seemed ok then after 5 miles the bike cut out again as if something had popped in the engine. I have since looked at the moving parts and everything seems to be moving when cranking over. There is plenty spark and no problems with fuel and there is plenty compression.

When turning over on the starter it seems to be turning too fast although it wont start. The oil filter has been cleaned out and there was some metal debris but none that would acount for a major failure of any component.

Any ideas

Anyone got the stator values when connecting an Ohm meter across the stator pickup that feeds the CDI

My zongshen zs250GS was started the other morning before riding (sidestand switch bypassed with cable tie) .Jumped on the thing to ride away and it hasn't ran since.

I only got the bike last month with 300 miles on it. I cant get a spark from the plug when turning over. I have replaced the coil but can't find a cdi unit in the uk with the correct connections.

Any ideas (I'm in Scotland)