ZongshenForum.com

Models => Sportbikes => Topic started by: saint3570 on August 15, 2009, 02:06:32 PM

Title: Spark plug question???
Post by: saint3570 on August 15, 2009, 02:06:32 PM

hey guys just bought  a new plug the iridium ix and realized it does not have terminal nut, do i need one for my 250 gs   ???             the old one has a nut, and can i use the old one?  ???

Title: Re: Spark plug question???
Post by: cbyerspace on August 16, 2009, 01:47:23 PM

no you should be fine, you just put the cap over the thread...

Title: Re: Spark plug question???
Post by: z250gs on August 17, 2009, 06:38:59 AM

hey saint, don't forget to check your plug gap too. These plugs are usually pre-gapped for a certain type of engine - probably not for ours.  The book says 0.6-0.7mm. At one point mine was above this range and I noticed the difference in running after closing back to within range.

Title: Re: Spark plug question???
Post by: saint3570 on August 17, 2009, 07:04:00 PM

yes i was wondering about that the plug comes gapped at 8 mm i gets i need to adjust it i need to buy a spark plug gapper thingy  thanks guys for your help!