3
« on: July 11, 2008, 06:55:02 PM »
well the little pollution pump on the right front of the bike was removed and i re routed the hoses. eliminated the small hose from the intake to the pump and to the carbon canister on the left front of the bike.Just put a vacume cap on the nipple on the intake. the crank case breather was split three ways and i re routed it directly to the air box. did leave the carbon canister with only the fuel tank vent hooked to it just in case.As far as the tube coming out of the head i took the fitting out of the head and put a small weld in it to seal it off. otherwise it would be a direct exhaust leak. I have reached 80 mph on my bike and i am a big fellow. I have a 35 mile commute to work and i average 65 mph not pushing it. I can run 70-75 but it has to be hard on the bike for that extended amount of time. thinking of regearing the bike to bring the rpms down some. also an exaust change to help it brethe. Im gonna push my little zongshen to the max see waht it can handle(without killing it). I belive this bike has alot of potential that was ruined by pollution junk.