ZongshenForum.com
Zongshen Motorcycle, Scooter And ATV Forum

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - CorvairKid

Pages: 1
1
Sportbikes / Re: HELP!!! I was given a free gs250
« on: May 12, 2013, 08:48:08 AM »
hey folks i got it all figured out no worry's [url]www.TBTrends.com[\url] has my CDI on the way with other parts i needed i found the starter relay  ;D



2
Sportbikes / Re: HELP!!! I was given a free gs250
« on: May 03, 2013, 03:33:59 PM »
ok i got my new cdi box from a local dealer he gave me a JANTEL JT111026 but i still have no spark..... any hints the coil seems to test out ok on a multi meter and the spark plugs clean and new enough looking its a ngk R  DPR8EA 9 ..... a little help would be nice

3
Sportbikes / Re: HELP!!! I was given a free gs250
« on: April 14, 2013, 06:03:22 AM »






4
Sportbikes / Re: 250gs cuts out at 2500 revs
« on: April 13, 2013, 01:20:07 PM »
sounds like an air leak around the intake side take a can of starter fluid and lightly spray between the carb and the intake side on the cylinder beware not to use to much as you could flame up but if the motor dies or reves up there's a leak and you need to seal it it might be as simple as a lose screw

5
Sportbikes / HELP!!! I was given a free gs250
« on: April 13, 2013, 12:58:31 PM »
and boy its is some sorta shape i cant name i'm still cleaning the vines out of it its a 250gs 2008 model the plastics all broken up so i'll be making a naked bike out of it with bug eye head lights but first i need to get her running it was a running bike when parked but rummer has it it had cdi issues (what else is new) but first i got a red block says fuse on the side with 3 wires and a melted hole i saw one posting that spoke of a color wiring diagram any chance any one has it still? what would be a great start btw the crank case had nice clear gold oil in it with no water so i'm assuming a little love on the top end with some oil in the cylinder and over the valves and chain it should run ok i really want to get to work asap on my new project as i need a set of wheels soon

Pages: 1

An Error Has Occurred!

Call to undefined function split()