ZongshenForum.com
Zongshen Motorcycle, Scooter And ATV Forum

Valve adjustment

darealestspigguh · 5 · 2245
« previous next »
Pages: 1

darealestspigguh

  • Newbie
  • *
    • Posts: 61
    • View Profile
    • Email
on: September 18, 2010, 07:49:59 PM
does anyone know the best gap for the intake and exhaust valve, im gonna adjust and manual says 0.07mm-0.10mm for both...
« Last Edit: September 20, 2010, 10:16:03 AM by darealestspigguh »

z250gs

  • Newbie
  • *
    • Posts: 58
    • View Profile
Reply #1 on: September 20, 2010, 12:25:43 AM
What manual are u using? Mine reads: Inlet=0.07mm ; Exhaust=0.10mm. I adjusted mine to these clearances.   

darealestspigguh

  • Newbie
  • *
    • Posts: 61
    • View Profile
    • Email
Reply #2 on: September 20, 2010, 10:19:40 AM
yeah, that must be right, it didnt specify in the manual between exhaust and inlet, but i know exhaust is generally a little bigger. By the way, 0.7 was typo, i meant .07.

lynchburg

  • Newbie
  • *
    • Posts: 6
    • View Profile
    • Email
Reply #3 on: September 23, 2010, 12:00:27 PM
0.06 - 0.08mm. for intake and exhaust. 0.10mm is the maximum limit. Stay within 0.06-0.08.

darealestspigguh

  • Newbie
  • *
    • Posts: 61
    • View Profile
    • Email
Reply #4 on: October 14, 2010, 02:28:00 AM
What symptoms should be remedied by a valve adjustment? If not done, what could be the consequences?

Pages: 1
 

An Error Has Occurred!

Call to undefined function split()
Back